|
AT9
HD Five LNB Multiple-Satellite Antenna Dish System and Accessories |
|
|
|
 |
 roof
wall
 balcony
 pole |
|
Zinwell WB68 KA/KU switch
 Sale
$69.99 |
AT9 5 Satellite antenna dish system
Sale $99.99
Tech. installation pdf emailed
w/order |
Small & Large monopole braces
Sale $24.99
set of 2
Mast/foot plate comes w/AT9
dish |
Mounting examples
Balcony mount uses one monopole. Pole mount must
be 3" underground w/quick dry concrete. |
|
|
 NPR1
Non-Penetrating Roof Mount and Pitch-Roof Mat.
Holds 6 standard cinder-blocks, for extra
security place 2 extra cinder-blocks on top perpendicular,
just in front and behind the dish mast. (Dish not included)
NPR1 Non-Penetrating Roof Mount On Sale
$39.99
 We
highly recommend protecting the roof with a proper hard rubber pitch-room mat.
The correct mat is the
NPRMAT1, Pitch-Roof Mat For NPR Mount - 38" x 24" and sells for
$21.80
|
|
Over The Air (OTA) Antenna Systems |
|
Winegard
SquareShooter UHF/VHF High Performance OTA Antenna |
|
 |
|
SS-1000 antenna
$89.99 |
Also available with built-in pre-amplifier, model
SS-2000
$149.99 |
Easily mounts in any attic |
|
 |
|
|
The
SquareShooter SS-1000/2000
has no rear or side-lobes, that cause multi-path
problems
Great OTA ATSC HD Antenna.
This antenna only sees directly in front of itself. |
Antenna Specifications:
Avg. Beamwidth, 610
Avg. VSWR across band, 1.3:1
Avg. Front to Back, 13 dB
Avg. gain, 470-806, 4.5db
Width Housing, 16" x 16" x 4" |
|
Optional Pre-amp adds
the kick this otherwise tame looking antenna might miss |
11dB
gain on all UHF/VHF channels, Average Noise: 3dB
Designed not to overload your OTA
receiver. Improves the Squareshooter range to up to 50 miles.
Winegard Pre-amp. HDP-269 $54.99 |
Amazing
gain 17/19 dB V/UHF very low noise, 2.8 dB, this match was made in
heaven for long range reception.
Make it a Killer OTA ATSC HD Antenna... Upgrade your
system to include a Chromstar Antenna Amplifier. Works up to 75 miles.
Winegard Pre-amp. AP8700
$84.99 |
|
Top
Of Page
|
Hot Link Pro Ir
emitter system |
No
holes to drill
Hide
Hot Link Pro super sensitive slim-line IR eye behind your cabinet
or speaker grill, in a door slot, toe kick or on top of your
cabinet, and still get more freedom to roam with your remote while
your A/V stays hidden!
Hot
Link Pro! enhances performance for six A/V components with
stick-on/removable emitters, a super sensitive IR eye, and powered
with a UL/CSA wall transformer.
Get
Great Remote Control Roaming Freedom, and Enhanced Beauty of your
Home Theater.
On sale
$99.99 |
Hot Link Pro Ir
emitter system
Advantages
Extends
useful distance of remote controls up to 65 feet.
Cabinet
doors can remain closed.
Boosts
performance for up to six separate A/V components.
AC
powered - no batteries needed "radioless" operation.
Makes
remote control more convenient and useful.
Has
a more sensitive "eye" to receive from greater
distances.
Works
with your existing remote
Keeps
children and equipment safe.
Works
with most infrared remote controls
Specifications:
Main
Repeater Box is 1 inch high, 2 inches wide and 3 inches long. Six
Infrared Emitters are on a black 7 foot long ribbon cable mounted
to the main Repeater Box that peels apart to allow up to 14 feet
distance between emitters. Clear double-stick tape is reusable if
surfaces stay clean and will not harm plastics. Free replacement
tape available.
Eye is a 7/32 inch diameter, 1-1/4 inch long brass tube with a
side viewing window on a 3 foot cable that allows mounting in
cabinet door slots and comes with velcro ™ tabs and black screw
down tab for mounting. Extensions for this cable are available
How
Hot Link Pro works:
The
Hot Link patented system constantly monitors the ambient light and
noise floor. In darker ambient light it becomes more sensitive to
remote control pulses, making the eye the most sensitive it can be
based on ambient light environment. When the eye is in a
"hidden" location behind a speaker grill, tucked up in a
toe-kick or in a door slot it compensates for the expected loss in
distance by becoming more sensitive to the pulses emitted from
remote controls.
This allows the Eye to mounted almost anywhere. Direct line of
sight is not need in most installations. Some clients have the Hot
Link Pro Eye mounted on the trim of a closet behind the seating
area to one side or down the hall from their Home Theater room.
Hot
Link Pro can be used with cabinet doors open or closed. The speed
at which the Hot Link repeats signals is so fast, A/V equipment
just sees the signal as one signal. |
|
|
RF Modulated Signal Distribution
Systems |
|
Remotely Transmit Picture,
Sound and Remote Control Signals TO OTHER TV’s
Send Video/Audio/remote
control operation to other TV's
The WaveMaster LF30S is a wireless transmitter/receiver that lets you remotely
control your A/V system throughout the home, eliminating the hassle and expense
of extra wiring. It transmits across a 2.4 GHz frequency band for the clearest
signal up to 150 feet away. It contains a built-in IR remote control extender
that enables you to use your existing or universal remote to control your A/V
system in another room. The LF30S is compatible with all TVs, new and old. Its
multiple channel selections allow you to select from four different channels to
ensure that you’re receiving the best signal possible. Its built in modulator
ensures a one time easy connection. The LF30S is easy-to-install requiring no
tools and is clearly labeled for quick setup.
SOME OF THE WAYS YOU CAN USE YOUR WAVEMASTER LF30S
The LF30S is a
flexible alternative to extend the capabilities of any A/V components. The LF30S
can operate from anywhere within the home or office. It transmits on a 2.4 GHz
signal penetrating walls, doors, ceilings and floors without interference
allowing total A/V viewing freedom. The LF30S is also expandable. You can extend
it for use in a variety of ways. For instance, you can use it to function as a
baby monitor and security system. It can transmit signals from your CD or stereo
system as well as connecting it to your computer to enjoy Internet content
throughout the home.
Sale
$149.99
$99.99
This unit sends remote control signals to your other TV, to remotely
operate the DIRECTV® receiver.
|
View DIRECTV®
programming in any Room, Wireless Installation
Same as above (Wavemaster LF30, but does
not send remote control signals) This
system slaves the channel from a DIRECTV® Receiver to another room hence, you can
only view the same channel. Adding
a HUGHES Radio Frequency Remote Control gives you the ability to control the
channel changing & on/off from the slaved room.
The
Leapfrog WaveMaster 20 system transmits video and stereo audio through
the air from the main TV to remote TV's located anywhere in the home-eliminating
the need for in-wall or external wiring. WaveMaster 20 uses the super-high
2.4GHz frequency band for the clearest signals over longer distances, and
can be used with all video and audio components. Complete WaveMaster
2 box system for only
$99.99
$79.99.
Top
Of Page
|
Gefen® DVI Video HD Switch |
|
2x1
HDTV Switcher With Discrete IR Remote Control
Easily Switch Between Two HDTV Devices Using One HDTV
Display
When all three
devices (the display plus the two sources) are connected to the 2x1
HDTV Switcher and powered on, you simply select which source you
want to view on the display using the Switcher, the IR remote that
comes with it, or any universal remote you program to work with the
Switcher.
Fully HDCP Compliant
HDCP (high definition content protection) is a standard that is
encoded into the video signal to prevent it from being pirated. If a
source device is HDCP coded and is connected to a HDTV display or
projector without the proper HDCP decoding mechanism, the picture is
relegated to “snow” or in some cases, only 480P resolution. In order
to see HDTV with HDCP compliance, both the source and display
devices must be equipped with DVI connections that can enable HDCP
decoding, such as the 2x1 HDTV Switcher.
Package Includes: •
2x1 HDTV Switcher • RMT-2IR remote control • Two 6-foot DVI cables •
Power supply.
Specifications: •
Video Amplifier Bandwidth: 1.65 GHz • Single Link Range:1920 x 1200
• Vertical Frequency Range: 60 Hz • DVI Input/Output Connector: Type
DVI-D • Power Consumption:15 Watts (max.) • Power Supply 5VDC •
Dimensions:4”W x 1”H x 4”D • Shipping Weight: 2 lbs. • HDCP
Compliant.
|
 
On Sale $249.00 Delivered
#EXT-DVI241
Available w/4 DVI inputs EXT-DVI 341 add $100. |
|
Gefen® HD
DVI Video and Digital Coax/Optical AC3 Switch |
|
2x1
HDTV Switcher With Discrete IR Remote Control
Easily Switch Between Two HDTV Digital Video & Audio Sources
Using One HDTV Display
When all three
devices (the display plus the two sources) are connected to the 2x1
HDTV Switcher and powered on, you simply select which source you
want to view on the display using the Switcher, the IR remote that
comes with it, or any universal remote you program to work with the
Switcher.
Fully HDCP Compliant
HDCP (high definition content protection) is a standard that is
encoded into the video signal to prevent it from being pirated. If a
source device is HDCP coded and is connected to a HDTV display or
projector without the proper HDCP decoding mechanism, the picture is
relegated to “snow” or in some cases, only 480P resolution. In order
to see HDTV with HDCP compliance, both the source and display
devices must be equipped with DVI connections that can enable HDCP
decoding, such as the 2x1 HDTV Switcher.
Package Includes: •
2x1 HDTV Switch • Remote control • 2 6' DVI cables • 2 Optical
cables • Power supply.
Specifications: •
Video Amplifier Bandwidth: 1.65 GHz • Single Link Range:1920 x 1200
• Vertical Frequency Range: 60 Hz • DVI Input/Output Connector: Type
DVI-D • Dolby Digital audio connectors both Optical AC3 and Digital
Coax in and out • Power Consumption:15 Watts (max.) • Power Supply
5VDC • Dimensions:4”W x 1”H x 4”D • Shipping Weight: 2 lbs. • HDCP
Compliant.
|
 
On Sale $349.00 Delivered #EXT-DVI241A
|
|
Gefen® HD
DVI Video Cable Extender/Repeater |
|
Extends the length of
DVI Cable
The ex•tend•it
HDTV Repeater extends the length of any DVI cable by regenerating
the HDCP-DVI signal before it outputs to the HDCP-DVI monitor or
projector. The HDTV Repeater enables you to relocate your DVD
player or satellite receiver to a safe, quiet and clutter-free
environment. Can be used with HDMI to DVI conversion cable or HDMI
to DVI Video adaptor.
How it works:
Place your HDTV
or HDTV projector as far as you need it to go (up to 100'). One side of the
ex•tend•it HDTV Repeater is connected to a long DVI (male to male)
cable, which is connected to the satellite receiver's DVI output.
The HDTV or HDTV projector is placed next to the HDTV Repeater and
connected to the HDTV Repeater's output.
This device is HDCP compliant.
Package Includes:
• HDTV
Repeater • One 6ft DVI cable •One 5v Power Supply
Features:
• Connects
computers with DVI graphics card (AGP or PCI bus, to DVI
compatible monitors or projectors
• Maintains highest DVI
• single link video resolution
• Supports DDWG standard for DVI compliant monitors
• Installs in minutes
• DVI cables are used to connect from the computer to the DVI
input and from the DVI repeater output to the flat panel display
Specifications:
• DVI Amplifier
Bandwidth:
1.65 GHz
• Actual Bandwidth: 1.6 GHz
• Input Video Signal: 5 Volts p-p (TTL)
• DVI Connector: Molex 24 pin female
• Power Consumption: 15 Watts (max.)
• Power Supply: External 5DC
• Dimensions: 2.75"W x 1"H x 4.5"D
• Shipping Weight: 5 lbs. |
 
On Sale $249.00 Delivered |
|
Gefen® HD
HDMI to DVI Video Adaptor |
The HDMI to DVI Adapter
The HDMI to DVI Adapter lets you connect an HDMI to HDMI (M-M)
cable to a DVI to DVI (M-M) cable. 100% HDMI backward
compatibility with existing DVI devices.
Applications:
1- Extending HDMI cables by using existing DVI cables
2- Bridging between DVI cables and HDMI cables
Will I loose any quality by
converting from HDMI to DVI?
Absolutely not, the DVI specification is set to support a higher
bandwidth for computer and high definition (HD) resolutions. The
HDMI specification is set to support only HD resolutions (i.e.
480i, 480p, 720i, 720p,1080i). You will not loose quality by
changing to a different cable.
Products used:
• LCD Displays • LCD/DLP/CRT Projectors • Plasma
TVs • Rear-Projection TVs • All HDTV compatible products •
Satellite Set Top Boxes • DVD Players
Specifications:
Dimensions:1.7”W x 1”H x 1.7”D • HDMI Connector: Molex HDMI
19pin Female • DVI Connector: Molex DVI-I 29pin Female
|
On Sale $39.00 Delivered
|
|
|
|
Gefen® HDMI Video HD Switch |
|
2x1
HDMI Switcher With Discrete IR Remote Control # EXT-HDMI-241 $249.00
|
|
|
Easily
Switch Between Two HDTV Devices Using One HDTV Display
2 HDTV Sources + 1 HDTV Display = High Definition
Convenience and Ease
The ex-tend-it 2x1 HDMI Switcher enables effortless HDTV
source switching using a single high definition display. A
simple and reliable solution, the 2x1 HDMI Switcher links
any two HDTV sources (DVD players and satellite set tops)
to one HDTV display. It completely eliminates the need to
disconnect then reconnect multiple HDTV sources, saving
time by providing a fundamental tool that brings it all
together behind the scenes. When all three devices (the
display plus the two sources) are connected to the 2x1
HDMI Switcher and powered on, you simply select which
source you want to view on the display using the Switcher,
the IR remote that comes with it, or any universal remote
you program to work with the Switcher.
High
Definition Television Defined
HDTV (high definition television) is a rapidly emerging
video standard that transmits large amounts of visual data
(resolutions up to 1920 x 1200 and 1080I) using HDMI
(Digital Video Interface) connectors, resulting is crisp,
highly defined visuals that resemble movies shot on 35mm
film. Since 2000, DVD players, computers, televisions and
monitors have been equipped with the 24-pin HDMI
connection ports. HDMI is the current transmitter of
choice for HDTV because it is a purely digital interface
that retains the integrity of the video signal through any
transmission—even when sent over long lengths of cable.
With HDMI, there is no digital-to-analog or
analog-to-digital conversion process that needs to take
place before, during or after transmission. This
streamlined, straightforward process makes HDMI the
current preferred interface for HDTV.
Fully
HDCP Compliant
HDCP (high definition content protection) is a standard
that is encoded into the video signal to prevent it from
being pirated. If a source device is HDCP coded and is
connected to a HDTV display or projector without the
proper HDCP decoding mechanism, the picture is relegated
to “snow” or in some cases, very low (480P)
resolutions of the images. In order to see HDTV with HDCP
compliance, both the source and display devices must be
equipped with HDMI connections that can enable HDCP
decoding, such as the 2x1 HDMI Switcher.
How
it Works
Simply connect your HDTV display to the
Switcher’s display output. Then connect both HDTV
sources to the Switcher’s inputs using the HDMI cables
that come with the Switcher. Once the sources, the
Switcher and the display are all powered on and connected,
you simply select which source you want to view.
Package
Includes:
• The HDMI Switcher
• RMT-2IR remote control
• Two 6-foot HDMI cables
• 5VDC power supply
Features:
• Saves money on hardware—no need to purchase multiple
high definition displays
• Saves space—a single high definition display works
with both DVD players and satellite set tops
• Saves time—no need to disconnect and reconnect HDTV
devices—everything is always connected and accessible
• Maintains high resolution video, sharp HDTV
resolutions up to 1080P are easily achieved. For computer
users, the 2x1 HDMI Switcher conforms with HDMI 1.0
specifications for resolutions up to 1920x1200
• No loss of quality—the integrity of the high
definition signal is preserved throughout the
transmissions using high caliber HDMI cables that
ensure the signal is maintained
• Operational flexibility—you can switch at the
source, with the IR remote control or your own universal
remote
• Compatible with all HDMI-equipped, HDCP-enabled HDTV
devices. To determine if your device is HDMI-equipped,
simply look for the 24-pin connector on the back of
the unit. For computer users, the 2x1 HDMI Switcher is
compatible with all HDMI-equipped computers and
supports Apple’s line of flat panel displays when used
with the HDMI to ADC Conversion Box.
• Easy to install and simple to operate
Specifications:
• Video Amplifier Bandwidth: 1.65 GHz
• Single Link Range:1080P/1920x1200
• Vertical Frequency Range: 60 Hz
• HDMI Input/Output Connector: Type A 19-pin
• Power Consumption:15 Watts (max.)
• Power Supply 5VDC
• Dimensions:4”W x 1”H x 4”D
• Shipping Weight: 2 lbs.
• HDCP Compliant
4x1 HDMI Digital Audio Switcher With Discrete IR
Remote Control
|
Easily Switch Between 4 HDTV Devices Using
1 HDTV Display
4 HDTV Sources + 1 HDTV Display = High Definition
Convenience and Ease
The ex•tend•it 4x1 HDMI Switcher enables
effortless HDTV source switching using a single
high definition display. A simple and reliable
solution, the 4x1 HDMI Switcher links any four
HDTV sources (DVD players and satellite set tops)
to one HDTV display. It completely eliminates the
need to disconnect then reconnect multiple HDTV
sources, saving time by providing a fundamental
tool that brings it all together behind the
scenes. When all five devices (the display plus
the four sources) are connected to the 4x1 HDMI
Switcher and powered on, you simply select which
source you want to view on the display using the
Switcher, the IR remote that comes with it, or any
universal remote you program to work with the
Switcher.
This product will ONLY support digital
video signals.
Fully HDCP Compliant
HDCP (high definition content protection) is a
standard that is encoded into the video signal to
prevent it from being pirated. If a source device
is HDCP coded and is connected to a HDTV display
or projector without the proper HDCP decoding
mechanism, the picture is relegated to “snow” or
in some cases, very low (480P) resolutions of the
images. In order to see HDTV with HDCP compliance,
both the source and display devices must be
equipped with HDMI connections that can enable
HDCP decoding, such as the 4x1 HDMI Switcher.
How it Works
Simply connect your HDTV display to the
Switcher’s display output and your digital audio
to the digital out. Then connect both HDTV sources
to the Switcher’s inputs using the HDMI cables and
TOS link cables that come with the Switcher. Once
the sources, the Switcher and the display are all
powered on and connected, you simply select which
source you want to view and listen. |
|
EXT-HDMI-441A
Price:
$399.00 |
Features:
• Saves money on hardware—no need to purchase multiple
high definition displays
• Saves space—a single high definition display works
with both DVD players and satellite set tops
• Saves time—no need to disconnect and reconnect HDTV
devices—everything is always connected and accessible
• Maintains high resolution video—beautiful, sharp
HDTV resolutions up to 1080P are easily achieved. HDMI
Switcher conforms with HDMI 1.0 specifications for
resolutions up to 1920 x 1200.
• No loss of quality—the integrity of the high
definition signal is preserved throughout the
transmissions using high caliber HDMI cables that
ensure the signal is maintained
• Operational flexibility—you can switch at the
source, with the IR remote control or your own
universal remote
• Compatible with all HDMI-equipped, HDCP-enabled HDTV
devices.
• Easy to install and simple to operate |
Back View
Package Includes:
• The 4x1 HDMI Switcher
• RMT-4IR remote control
• Four 6-foot HDMI cables
• One TOSLINK fiber optic cable
• 5VDC power supply
|
Specifications:
• Video Amplifier Bandwidth: 1.65 GHz
• Single Link Range:1080P/1920x1200
• Vertical Frequency Range: 60 Hz
• HDMI Input/Output Connector: Type A 19-pin
• Power Consumption:15 Watts (max.)
• Power Supply 5VDC
• Dimensions:4”W x 1”H x 4”D
• Shipping Weight: 2 lbs.
• HDCP Compliant |
The DVI
or HDMI CAT-5 Extender
|
The ex•tend•it DVI CAT-5 Extender extends your DVI
or HDMI display up to 150' from your HDTV
DVI or HDMI source.
How it works
The DVI (also available with HDMI
connector) CAT-5 Extender sender unit sits next to
your computer, DVD player or any set-top box. The
cable supplied with the DVI CAT-5 Extender
connects your DVI source to the send unit. The DVI
CAT-5 Extender receiver unit sits next to your DVI
display - up to 150 feet away. The display plugs
into the back of the DVI CAT-5 Extender receiver
unit. Two CAT-5 cables* connect
the DVI CAT-5 Extender-S and the DVI CAT-5
Extender-R units to each other.
The DVI CAT-5 Extender is HDCP compliant.
Package Includes:
the DVI CAT-5 Extender-S
the DVI CAT-5 Extender-R
One DVI to HDMI 6 foot
One 5v Power Supply
Features:
• Uses CAT-5* cable for DDC and
control signals
• Extends any DVI (Digital Video Interface)
compliant device up to 150 from the computer
• Saves space on your desktop Increases
productivity
• Eliminates computer noise where you work
• Supports VESA Standard resolutions and HDTV
resolution
• Supports DDWG standard for DVI compliant
monitors
• Installs in minutes
Specifications:
• Video Amplifier Bandwidth:
1.65 GHz
• Single Link Range:1080P/1920 x 1200
• Input Video Signal:1.2 volts p-p
• Input DDC Signal: 5 volts p-p (TTL)
• Input HDMI Connector
• Output DVI Connector: Molex 24 pin female
• Link Connector: RJ-45
• Power Consumption: 15 Watts (max)
• Dimensions: 3.4” D x 3.25” W x 1.25” H
• Shipping Weight: 3 lbs.
* - A shielded CAT-5 cable for video is
recommended for optimal video quality.
The DDC CAT-5 cable does not need to be shielded. |
CAT5
extenders, HDMI-HDMI or DVI-DVI are available. $499.00 delivered to your door.
Just tell us what configuration you want in the comments. Mix and Match
HDMI-DVI add $100. |
Above photo is the CAT-5 to DVI extender
Above photo is the CAT5 to HDMI extender |
|
|
|
HD Component Video and or Analog with AC3
Digital Audio HD Switch |
|
Zektor's HDS4.1 HDTV
audio/video switch 1 output to 4 source!
On sale $259.99
FREE UPS Ground SHIPPING!
The HDS4 is capable of switching 4 sources of
component video, digital audio (coax & optical) & analog audio, with the
convenience of IR remote controllability. It's flexible inputs and passive
switch contacts allow for switching of 5 wire video formats such as VGA (RGBHV),
as well as reverse operation.
Zektor's HDS4.2 HDTV
audio/video switch up to 5 sources and display up to 2 outputs w/push button
control
The HDS4.2
is capable of switching five sources of component video, digital audio
(coax and optical), analog audio, and out-putting to two component video
displays, all with the convenience of IR remote controllability, and
optional RS-232 control. It's flexible inputs and passive switch contacts
allow for switching of 5 wire video formats such as VGA (RGBHV), as well
as reverse operation (1 source to 4 outputs).
High Definition Switch 4.2 is the same as the
original HDS4, with two new features. 1. Push button front panel control
and 2 HD component video outputs, instead of 1.
 |
4 Inputs, 2 Outputs Up to four sources
of HD component video, and two outputs. One output is a passive
pass through, the second output is buffered with high speed amplifiers
capable of the full HD bandwidth. Video performance at 37MHz is -0.1dB
on the passive output, and -0.1dB on the buffered output (avg. of all
channels). -3dB bandwidth is over 100MHz on both outputs. Read our
Component Video Primer for more information on understanding bandwidth
requirements. |
|
Passive
Switching Design. Video and analog audio signals pass through
Silver Alloy with Gold plating, relay contacts. This passive design
provides the same quality as a direct cable bypass. All inactive
inputs are 75 ohm terminated to reduce cross talk, and to greatly
reduce the possibility of spurious noise pickup on any unused inputs.
The passive design also allows signals to be routed backwards through
the switch, allowing up to four display devices to be switched to one
source. (Note: Digital audio and the second video output are not
bi-directional.) |
|
Component
Video, L/R Analog Audio, Digital Audio on Coax (SPDIF) / Optical
Digital Audio (Toslink) are available
on each input. |
|
New buttons allow direct selection of
desired input. |
|
Optical (Toslink)
and Coax (SPDIF) are both automatically converted. When
either input is active, both signals are available on the outputs.
|
|
The Left
and Right Analog Audio inputs use the same passive design as the
Component video inputs. This allows them to also be used for
high bandwidth signals such as RGBHV or VGA (some adapters to RCA
plugs would be needed). |
|
Controllable
using any Universal Remote. Control the HDS4.2 using any universal
remote by selecting from a small list of existing manufacturer command
codes, or by teaching the HDS4.2 to use any unused buttons on your
existing remote. There's no need to use a learning remote control
(though the HDS4.2 will work fine with one); the HDS4.2 can be taught
to use any unused buttons on your existing remote control.
(Remote control not included.)
|
|
Remote
Control interface allows: Power Toggle, Bright/Dim/Auto
Display Modes, Direct Channel Selection, Channel Up, Channel Down and
for better integration with universal remotes with macro capabilities
Power On, and Power Off are also available.
|
|
Optional
RS-232 - RS-232 can be factory or dealer installed. Full
bi-directional protocol allows for full control and inquiry of current
state. |
|
Auto Dimming
Display. The LED indicator lights can be set to Bright, Dim, or
Auto mode. Auto mode will fade the LEDs to half power after a channel
is selected. |
|
Full Size Metal
Enclosure for better integration into your system with machined
aluminum front panel. (17"W x 6.5"D x 1.75"H)
|
|
Available
in Black or Silver.
|
|
Rack Mountable,
1RU. (Rack mount ears available in black only, sold
separately.) |
|
Gold Plated
Connectors used throughout design.
Available in
Black or Silver $499.99 Free shipping. |
|
|
Extra Heavy
Duty Professional Multimedia/Satellite PC/TV Surge/Lightning protectors |
 
Designed for DIRECTV® Satellite
and High End Home Theater Systems |
FEATURES
Protect or Disconnect™
Circuitry safeguards equipment against all surges.
Eight AC power outlets. All outlets are spaced for
transformers. Four Always On and four Switched outlets provide
maximum flexibility.
Satellite, Coax and
Telco connectors. Protection for 1 satellite
coax line, 2 cable coax lines and 1 pay-per-view phone line.
Diagnostic lights for
your safety. Ground OK light, when lit,
indicates proper grounding and outlet wiring. Power Protection
light is your assurance that the Panamax protector is doing
its job.
Lifetime $100,000
Connected Equipment Warranty. Panamax will protect your
equipment or we will repair or replace up to $100,000!
Lifetime Product
Warranty. If your Panamax surge
protector is ever damaged, for any reason, Panamax will
replace it free!
3 Year Expanded Warranty. Your LNB and receiver are
covered by our exclusive 3 Year Expanded Warranty. |
POWER MAX® 8 DBS+3
$99.95
On
Sale
for
$49.99
Part
#: PM8DBS3 |
FEATURES
SurgeGate
Plus™ Circuitry. Our exclusive
SurgeGate Plus™ circuitry is an enhanced version of the
SurgeGate™ power monitoring system. The "Plus"
refers to its ability to protect against prolonged
under-voltages (brownouts), as well as prolonged
over-voltages. This circuitry automatically disconnects power
when either event is detected, then reconnects power once it
has returned to a safe level. (Overvoltage Shutoff @ 147v,
Undervoltage Shutoff @ 78v)
Eight AC
Power Outlets/ Eight Foot Power Cord. All outlets are
spaced for transformers. Four Always On and four Switched
outlets provide maximum flexibility. The power cord features a
space-saving right angle plug.
Optimized
Coaxial Line Protection. SignalPerfect™
Circuitry; 2 sets engineered specifically for cable TV (and
HDTV), and 2 sets engineered for satellite systems.
Expandable
Protection. Customize your
signal line protection with an unlimited number of add-on MAX
AllPath® Modules.
Lifetime
$5,000,000 Connected Equipment Warranty. Panamax will
protect your equipment or we will repair or replace up to
$5,000,000!
Lifetime
Product Warranty. If your Panamax
surge protector is ever damaged, for any reason, Panamax will
replace it free!
5 Year
Expanded Warranty. Your LNB and
receiver are covered by our exclusive 5 Year Expanded
Warranty. |
 MAX® 8 DBS+5
Perfect for Dual Coax
Satellite applications; HughesNet 2-Way & TiVo-DVR Systems
Price: $149.95
Part #: M8DBS5
On
Sale
for
$99.99 Free
shipping
Replaces: Max DBS+ GTM0604 |
 |
Home Theater Master®
MX-350 (Osiris)
Ir/RF
LCD
Screen Remote Control w/Joystick Operation
This new MX-350 (Osiris) Replaces the MX500 and adds RF operation by adding
the MRF250 Addressable RF Base Station for $99.
This preprogrammed and learning remote control
is designed to simplify your entertainment experience. The brightly backlit LCD screen actually has 26 individual pages for operating up to 10 audio and/or
video components. The component buttons are strategically placed around the LCD
screen and can be renamed, according too the actual components that your
audio or video system may include.
No
More Pointing - RF
Radio Frequency (RF) operation provides 50' - 100' range though walls and doors,
indoors or outdoors. Self-adhesive "flashers" affix to the infrared sensors on
the front panels of your components. The flashers relay commands to components
out of sight of the MRF-250's front blaster. The flashers plug in to the
MRF-250's rear flasher line outputs via their 10 foot cables. Six flashers are
included with each MRF-250.
Built-in preprogrammed database of over 1,000
audio and video component codes, and is also fully capable of learning
your home theater system's audio/video components remote control codes
(up to 530 functions).
Ergonomically designed and weight balanced to fit comfortably in
one hand. The brightly backlit LCD screen and buttons make navigation within
a darkened home theater environment a breeze. To further enhance the navigation
of the remote control, we have incorporated a multi-directional joystick.
Punch Through feature enables control of one component while the
remote is actually in another component mode. For example, you can adjust the
volume of the amplifier while actually in the DVD mode, eliminating the need to
toggle back-and-forth from the DVD screen to the amplifier screen.
The macro feature allows the remote control to be programmed to send out
multiple commands at once. The unit has 3 dedicated macro buttons, a "Power"
button and a "System Off" button that send out up to 20 commands each.
10 device
buttons send out up to 15 commands each, and 50 favorite channel buttons send
out up to 10 commands each. For example, the MX-350 can be programmed to turn on
all the components within the home theater system at just the touch of a button!
The MX-350 has a memory back-up system designed to prevent memory loss for up to
10 years.
MX-350 $149.00
MRF250 RF Base Station $99.00
Shipped Fed Ex Overnight for FREE |
 |
Home Theater Master®
MX-650 (Omega)
Ir/RF
LCD
Screen Remote Control w/Joystick Operation
This new MX-650 (Omega) Replaces the MX500 and adds RF operation by adding
the MRF250 Addressable RF Base Station for $99.
This preprogrammed and learning remote control
is designed to simplify your entertainment experience. The brightly backlit LCD screen actually has 26 individual pages for operating up to 10 audio and/or
video components. The component buttons are strategically placed around the LCD
screen and can be renamed, according too the actual components that your
audio or video system may include.
No
More Pointing - RF
Radio Frequency (RF) operation provides 50' - 100' range though walls and doors,
indoors or outdoors. Self-adhesive "flashers" affix to the infrared sensors on
the front panels of your components. The flashers relay commands to components
out of sight of the MRF-250's front blaster. The flashers plug in to the
MRF-250's rear flasher line outputs via their 10 foot cables. Six flashers are
included with each MRF-250.
Built-in preprogrammed database of over 1,000
audio and video component codes, and is also fully capable of learning
your home theater system's audio/video components remote control codes
(up to 530 functions).
Ergonomically designed and weight balanced to fit comfortably in
one hand. The brightly backlit LCD screen and buttons make navigation within
a darkened home theater environment a breeze. To further enhance the navigation
of the remote control, we have incorporated a multi-directional joystick.
Punch Through feature enables control of one component while the
remote is actually in another component mode. For example, you can adjust the
volume of the amplifier while actually in the DVD mode, eliminating the need to
toggle back-and-forth from the DVD screen to the amplifier screen.
The macro feature allows the remote control to be programmed to send out
multiple commands at once. The unit has 3 dedicated macro buttons, a "Power"
button and a "System Off" button that send out up to 20 commands each.
20 device
buttons send out up to 15 commands each, and 50 favorite channel buttons send
out up to 10 commands each. For example, the MX-650 can be programmed to turn on
all the components within the home theater system at just the touch of a button!
The MX-650 has a memory back-up system designed to prevent memory loss for up to
10 years.
MX-350 $249.00
MRF250 RF Base Station $99.00
Shipped Fed Ex Overnight for FREE |
 |
Home Theater Master MX-850
(Orion)
Ir/RF Remote. This PC
Programmable model ensures fast and reliable set up.
This new MX-850 (Osiris) Replaces the
MX800, add RF operation by adding the MRF250 Addressable RF Base Station for
$99.
No
More Pointing - RF
Radio Frequency (RF) operation provides 50' - 100' range though walls and doors,
indoors or outdoors. Self-adhesive "flashers" affix to the infrared sensors on
the front panels of your components. The flashers relay commands to components
out of sight of the MRF-250's front blaster. The flashers plug in to the
MRF-250's rear flasher line outputs via their 10 foot cables. Six flashers are
included with each MRF-250.
RF Addressing Offers Up To 16 Equipment Locations. Each MX-850 can be
programmed to operate equipment placed throughout the house, by installing an
MRF-250 base station at each location. In operation it's simple: when you select
a device located in the home theater, the MX-850 talks to the MRF-250 in the
home theater. This makes possible a dream come true! A macro may be programmed
to turn off all of the TVs in the entire house with one touch. Simply install an
additional at each TV location.
RF Routing Allows For Control Over An Array Of Identical Components. The
MRF-250 enables your installation to control up to 6 identical TVs or other
identical components (VCRs, CD players, etc.) by routing your commands only to
the TV you select on the MX-850. Other TVs will not receive commands.
Controls Up To 20 Components. The MX-850 controls up to 20 components.
Each of the 20 components can be programmed with up to 4 pages of LCD screens.
Easy To Program. A custom installer can use the MX-850 system software to
quickly design a remote control program to meet their exact needs in minutes.
The programming package also offers the Programming Wizard to lead the first
time programmer step by step through the customization process.
Windows Based PC Software. The MX Editor software contains over 1,500
"code sets" of Brands/Models, including hard to find and specific discrete codes
that allow for precise control of all system components. MX Editor also has the
ability to learn new commands and Live Update the IR database over the internet,
guaranteeing compatibility with any component you may add to your system in the
future. MX Editor can be used on a Mac if the user has a Windows 98, ME, 2000 or
XP emulator.
Extensive Macro Programming. The powerful memory of the MX-850 offers up
to 912 potential macro buttons. Each of these macros can play back recorded
sequences of commands that completely automate a complex system with one touch.
A macro can record and play back up to 190 steps with time delays between steps
when desired. For example: a single touch to the ON button could turn on the TV,
the surround sound system, and the satellite receiver, then set the TV to the
correct video input, the surround system to the right audio settings, and finish
by selecting your favorite satellite TV channel.
50 Favorite Channels. The MX-850 allows the user to program up to 50
favorite channels and the LCD screen will display the favorite channels that are
programmed. This allows the users to access their favorite channel with one
simple button press.
MX-850
$399.00
MRF250 RF Base Station $99.00
All prices include
shipping via Fed Ex Overnight and the programming cable. |
|
“The Ultimate in Remote Control”
With Wireless Whole
House RF Automation!
The MX-3000 Dynamic
Entertainment System is our most
sophisticated whole house remote control.
It provides the custom installer and
customer with an extraordinary
entertainment control solution, without
pointing the remote at all, through
walls, floors and cabinet doors,
indoors or outdoors.
Overview
In a unique synthesis of
hardware and software engineering, Universal Remote Control has
revolutionized the standards of custom installers for color touch screen
automation. The Home Theater Master MX-3000 offers some superficial
similarities to previous touch screen offerings. However, in this review
of the hardware and software specifications, it should be clear that the
power of this new design offers custom installers and end users long
needed relief in a number of key areas. The
twin goals of the design team were to improve the elegance and usability
of touch screens through the physical design while streamlining the
programming process to REDUCE THE TIME required to install a touch screen.
MX3000 only $999.00 FREE Fed
Ex Overnight Shipping.
Optional MRF250 RF Base Station
$99.00
| MX-3000
Features/Specifications: |
| LCD
Screen: |
|
| Range: |
| RF -
50-100 feet
IR
(line of sight) - 30-50 feet
|
|
| Power
Source: |
| | |
